DreamDeep

DreamDeep · Instrument

DreamCatch

DreamCatch turns one or more short parts of any recording into an instrument you can play. Choose a few seconds of a song, a field recording or a single held note and DreamCatch rebuilds it as a sound you can hold on your keyboard for as long as you like, with no loop point and no click.

A sampler loops the audio it is given. DreamCatch measures which frequencies the part you chose contains and how they move over time and then builds a new sound from those measurements. The attack plays once at the start of every note and a seamless loop carries on underneath it for ever.

It can split a whole mix into bass, drums, vocals and everything else. You can then catch one instrument out of a finished track.

You can join up to eight snippets into one sound and shape their sound with eight effects before MAKE rebuilds it.

The introductory price will rise on 1st February 2027 to £79 incl. VAT.

The DreamCatch window with a recording loaded, a snippet chosen and MAKE pressed, and the snippet shown in 3D.
8snippets to resequence from any sample
4multicore resynthesis engines
8sample reshaping tools
42modulation sources and destinations

Sounds

Audio demos

Each demo will play in turn automatically, if you just want to sit back and enjoy!

Beautifully Brassy

0:00 / 0:16

Video

See it at work

Intro Each sequencer plays looping gate, pitch and velocity patterns from the keys you hold, with its own rate, swing, direction and length. Each can drive different oscillators so one can play a bass line on the first oscillator while the other runs a faster figure on the other two, both locked to your DAW's tempo.
Overview Part 1
Overview Part 2
Overview Part 3
Presets Part 1
Presets Part 2
Stem Separation

How it works

Your first sound in five steps

DreamCatch takes you from a recording to a sound you can play in five steps and a snippet of a few seconds takes only a few seconds to make.

1. Drop a recording

Drag an audio file onto the DreamCatch window. It reads WAV, AIFF, FLAC and Ogg Vorbis files and on a Mac also MP3, AAC and the other formats the Mac itself can play. It takes up to 60 seconds of the file.

2. Choose a snippet

Drag across the waveform to choose the part you want to play, which DreamCatch calls the snippet. You can add up to seven more and all of them together can last up to 20 seconds. A steady part of a sound, such as a held chord or the body of a note, usually makes the best loop.

3. Press MAKE

MAKE measures the snippet and builds the sound in four different ways at once. Its key fills from left to right while DreamCatch works and its lettering flashes when the sound is ready.

4. Play it

Play your keyboard with up to 32 notes at once. Try each of the four methods while you play to hear the four ways DreamCatch has made the sound. Then keep the one you like.

5. Save it as a preset

A preset holds the sound itself and every control. It therefore plays exactly the same in any project, even if the recording is later moved or deleted.

Why it is different

Not a loop. A new sound.

A sample player loops the audio it is given. A held note therefore repeats the same piece of sound and often clicks or jumps where the loop starts again.

DreamCatch measures which frequencies the part you chose contains and how they move over time and then builds a new sound from those measurements. This is called resynthesis and it means the sound can be held for ever with no join and no click.

The attack plays once

Many sounds start with an attack that is unlike the rest of the sound, such as the strike of a piano key or the breath before a flute note. DreamCatch plays the attack once at the start of every note and builds the seamless loop from the part after it. The attack therefore never repeats.

You choose where the loop begins

DreamCatch finds where the attack ends by itself. Drag the ATTACK END marker to choose the point yourself and the next MAKE uses it. Double-click it to hand the decision back to MAKE.

Snippets that land on the beat

DreamCatch reads the tempo and the root note from the file name where it can. Faint lines then mark the recording's beats and bars and the edges of the snippet are pulled onto them as you drag. A snippet of exactly one or two bars is therefore easy to choose.

Up to eight snippets in one sound

Click + and drag across the waveform to add another snippet, up to eight in all. Each one has a letter from A onwards and you drag the letters to change the order they play in. MAKE joins them in that order into one sound, with a short crossfade at each join. In the two Moving methods you hear each snippet in turn and the other two methods hold one tone made from all of them.

Snippets in different keys

SAME PITCH retunes every snippet to the pitch of the first one before they are joined, as a tape is retuned by changing its speed. Use it when the snippets are different notes. Without it, MAKE hears them as one chord and finds the note they share.

Nothing else does all of this

Other instruments can resynthesise a sample. We have not found another that separates a mix into stems, lets you choose the snippet against the recording's beats, plays the attack once before a seamless loop, makes four versions at once for you to compare while you play and locks the sound's movement to your DAW's bars.

The SNIPPET view after MAKE, with the attack shaded and the ATTACK END line.
The SNIPPET view after MAKE. The attack is shaded up to the ATTACK END line, where the loop begins.

Stems

Catch one instrument out of a whole mix

SEPARATE splits a recording into four stems: BASS, DRUMS, VOCALS and OTHER, which holds everything else. Click any of them to work with that stem alone. ORIGINAL goes back to the whole recording and the snippet stays in the same place whichever you choose.

SEPARATE runs an AI model on the computer's graphics processor where it can. The model is a download of about 495 MB that you install once from inside DreamCatch. It then stays installed for every project.

P. ALL plays the whole recording or the chosen stem and P. SNIP plays just the snippet. With several snippets it plays them all, joined in their order. Both play at the same level as the keyboard. REV plays the recording and its stems backwards. NORM can turn up the whole recording and its stems together until the loudest peak is at full level, with the stems keeping their levels against each other. It can also turn up just the snippet. That is how a quiet snippet makes a loud sound.

SOURCE, with a recording loaded and a snippet chosen.
SOURCE, with a recording loaded and a snippet chosen. The lines underneath show the recording's name and length, the snippet and the tempo, which DreamCatch read from the file name.

Shape

Shape the snippet before MAKE

SHAPE, the fifth key in the bottom row of SOURCE, opens a panel of eight effects that change the snippet's own sound before MAKE makes a sound from it. MAKE then rebuilds the shaped sound and you can hold it for as long as you like.

Eight cards

EQ leans the sound brighter or darker or gives it a vowel. DRIVE adds warm harmonics and FOLD folds the louder parts of the wave into bright new ones. CRUSH adds grain and metallic tones and EXCITE adds air and bite. COMB rings like a string or hollows the sound, BELL moves the partials off the harmonic series for bells and metal and CHOP is a gate that opens and closes in time with your DAW's tempo. Each card has its own ON key and the cards that are on work one after another. Drag a card by its name to change the order.

Hear every change as you make it

While the panel is open, your keys play the snippet itself, shaped and looping at each key's pitch. A chord you hold changes as you turn a knob. DONE AND MAKE closes the panel and makes the sound from the shaped snippet straight away. Escape puts everything back as it was.

RANDOM and AS IT WAS

RANDOM switches on a few cards at random, sets their knobs anywhere and puts the cards in a new order. It is a quick way to find new sounds. AS IT WAS switches every card off and clicking it again switches the same cards back on. That makes it easy to hear what shaping has done.

See what shaping has done

While a card is on, SOURCE and SNIPPET in 2D draw the shaped snippet over the recording as a white wave you can see through. DreamCatch finds the snippet's pitch before it is shaped. Shaping therefore never changes which key plays the sound at its own pitch and the shaped snippet keeps the snippet's loudness.

The DreamCatch SHAPE panel with its eight cards: EQ, DRIVE, FOLD, CRUSH, EXCITE, COMB, BELL and CHOP.
The SHAPE panel open over the window, with its eight cards. The stage above it shows two snippets, A and B.

Resynthesis

Four ways to make every sound

MAKE builds the sound in four ways at once and the lit key chooses which one you hear. You can switch between them at any time, even while you hold a chord. That makes it easy to compare them.

FROZEN TONE

FROZEN TONE captures the snippet's overall tone and holds it perfectly still, with each part of it where it sat between left and right.

MOVING FROZEN

MOVING FROZEN holds the same tone and plays the snippet's own movement over it: how each part of its tone rose and fell, how it moved between left and right and how its pitch wobbled.

HARMONICS

HARMONICS rebuilds the sound from its exact harmonics, plus a frozen layer of everything between them. It suits pure single notes.

MOVING HARMONICS

MOVING HARMONICS adds the snippet's own movement to HARMONICS, as MOVING FROZEN does to FROZEN TONE. The two harmonic methods need a clear pitch.

PHASE

At 0 % every harmonic starts at a random point in its cycle, which gives the soft, wide sound of a pad. At 100 % the harmonics line up as they did in the recording, bringing back its wave shape and bite.

ONSET and STEADY

ONSET is the volume of the attack and STEADY is the volume of the loop that plays after it and underneath it. Turn ONSET down to leave out the attack. Turn STEADY down to hear only the attack.

The glass panel

A small glass panel reports what MAKE found: the pitch it measured, whether the sound is steady, how long the attack is and how far the sound is from its root note in cents. If MAKE cannot do what you asked, the panel says why.

RESYNTHESIS, with the four method keys, MAKE and the glass panel.
RESYNTHESIS, with the four methods, MAKE and the glass panel below.

Movement and pitch

Movement that keeps time

MOVING FROZEN and MOVING HARMONICS play the snippet's own movement and MAKE arranges it so that it repeats seamlessly. MOVEMENT sets how fast it plays, from a sixteenth of its own speed to sixteen times.

The movement plays at the same speed on every key, like an LFO. High notes therefore do not move faster than low ones.

Locked to your DAW

With SYNC on, the movement lasts an exact musical length at your DAW's tempo, from 16 bars down to a sixteenth-note triplet. Every note's movement is locked to your DAW's bars. A one-bar movement therefore starts again on every downbeat. EVEN, beside SYNC, keeps to the even lengths from 16 bars to 1/16, with no dotted or triplet lengths.

Rhythmic changes

MOVEMENT can be modulated. With SYNC on it steps through the musical lengths and each change lands exactly on your DAW's next beat. An LFO set to a square wave can switch the movement's length on every beat.

In tune

COARSE tunes the sound by up to 24 semitones either way and FINE by up to 100 cents. ROOT shows the key that plays the sound at its original pitch and DreamCatch chooses it for you. SNAP corrects the sound's own tuning so the root note plays exactly in tune.

FLUCTUATIONS

The FLUCTUATIONS slider under SYNC and EVEN makes every note you play fluctuate in everything but its pitch. Its speed, the level of each band and each band's place between left and right all drift smoothly and at random, for as long as the note plays. Its tone breathes and moves across the stereo picture. At 0 % nothing changes and 100 % is deliberately extreme.

MOVEMENT AND PITCH, with the MOVEMENT knob, COARSE, FINE, ROOT and SNAP.
MOVEMENT AND PITCH. The MOVEMENT knob shows the length of one turn of the movement.

The stage

Watch the sound you made

The stage across the top of the window shows the recording, the snippet you chose from it and the sound MAKE has made, each in 2D or 3D.

SOURCE and SNIPPET

Each sliver of the waveform is coloured from dark to bright with the tone of the sound. You can therefore see where it changes. Scroll or pinch to zoom right down to the single samples.

MADE in 2D

MADE draws the sound band by band, with the attack first and then two turns of the seamless loop. Each note you play is a bright line moving through the attack and then round the loop.

MADE in 3D

In 3D the endless loop becomes glowing rings, one for each band, with the attack as a spiral that comes in from outside to join them. Each note playing is a glowing dot with a short trail.

Your two colours

Everything that glows in DreamCatch is drawn in two colours, violet and magenta at first. You can choose any two colours in the cog panel and they are saved with your project.

MADE in 2D while a chord is held.
MADE in 2D while a chord is held. Each bright line is one of the notes playing.
MADE in 3D while a chord is held.
MADE in 3D while a chord is held. The endless loop turns as glowing rings and each note is a glowing dot.
The DreamCatch cog panel.
The cog panel. The colours are saved with each project and the other settings are kept for this computer, in every project.

Shaping the sound

A filter, two envelopes and three LFOs

Every note plays through its own filter, with its own filter envelope, as on a classic polyphonic synthesiser.

Two classic filters

The 12 dB filter is a gentle, open filter modelled on the Oberheim SEM and the 24 dB filter is a steep, strong ladder modelled on the Moog. Each can be low-pass, band-pass, high-pass or notch. Each note's filter differs very slightly from the others and loud sounds pick up a little warmth.

Envelopes, PAN and SPREAD

The filter and amplitude envelopes each have their own ATTACK, DECAY, SUSTAIN and RELEASE. The decay and release fall away smoothly, as on an analogue synthesiser. An ATTACK of 0 starts the note at once but never with a click. PAN places the sound between left and right. SPREAD gives every note you play its own random place between left and right.

Three LFOs

Each LFO has seven shapes: Sine, Tri, Saw, Ramp, Square, S&H and Random. It runs from one cycle every 100 seconds up to 120 Hz or locks to your DAW's tempo in 23 musical lengths from 8 bars to 1/32T.

Output and safety

A simple OUTPUT EQ shapes the final sound with BASS, MID and TREBLE. A safety limiter on everything DreamCatch plays turns peaks down smoothly before they can clip.

ANALOG

ANALOG makes each note stray, as the notes of an old analogue synthesiser do when its circuits drift. Each note gets its own tuning and, with the filter on, its own cutoff. Both then drift slowly while you hold the note. At 0 % every note is exactly in tune.

UNISON

UNISON plays up to eight voices on every note. Each voice has its own ANALOG tuning and its own SPREAD place. With ANALOG turned up they drift against each other into a rich chorus and with SPREAD they fan out between left and right. Every voice counts towards VOICES, the number of voices DreamCatch can play at once, which goes up to 32.

The AMPLITUDE row of knobs, with PAN and SPREAD.
The AMPLITUDE row, with PAN, SPREAD and the LIMIT light under VOLUME.

Modulation

Move almost any knob from anything

Right-click a knob and add a source to move it as you play: your keyboard's pitch bend, mod wheel, pressure, foot pedal and velocity, the two envelopes or the three LFOs. Each note is moved on its own. The pressure on one key of an MPE keyboard therefore moves only that note.

Steps and scales

Q moves the knob in equal steps instead of smoothly. P snaps the movement to the notes of a scale. An LFO on COARSE with P set to a scale plays a melody in that scale.

One source through another

VIA lets one source decide how much of another gets through. The mod wheel can then bring in an LFO, for example. SMOOTH softens sudden changes and SLOW lets a movement rise at once and fall back slowly.

See it at a glance

A modulated knob shows a badge with the number of its sources and a second marker on its ring showing where they are taking it right now. The knob itself never moves. Its setting and its automation in your DAW are therefore untouched.

The modulation panel for CUTOFF, with LFO 1 and the mod wheel moving it.
The modulation panel for CUTOFF, with LFO 1 and the mod wheel moving it.
The list of modulation sources.
The list of sources, with the MIDI sources first and then the envelopes and LFOs.

Presets

Keep every sound you catch

DreamCatch comes with a set of factory presets, which the preset browser lists together with your own. A preset holds everything needed to play a sound again: the sound MAKE made, the chosen method, every control and all the modulation. It does not need the original recording.

Find it fast

The preset browser searches names, descriptions and tags. INSTRUMENTS tags such as PAD, KEYS and BASS and DESCRIPTIVE tags such as WARM, BRIGHT and EVOLVING can be combined. A star marks your favourites.

Refine it

Choose a new snippet or move ATTACK END and press MAKE again on the same recording to refine the same preset. Its name, author, description and tags all stay.

Same settings, new sound

Hold Shift while you drop a new recording and DreamCatch keeps every control and all the modulation. It is the quick way to try your favourite settings on a different recording.

The DreamCatch preset browser.
The preset browser, with the INSTRUMENTS and DESCRIPTIVE tags at the left and the chosen preset's details along the foot.

Specs

System requirements

macOSDreamCatch needs an Apple Silicon Mac running macOS 11 or later. SEPARATE needs macOS 14 Sonoma or later.
WindowsDreamCatch needs a 64-bit Windows PC.
FormatsIt is available as AU and VST3 on the Mac and as VST3 on Windows.
HostsIt works in any DAW that loads AU or VST3 instruments, such as Logic Pro, GarageBand, Ableton Live, Reaper and Cubase.
PlayingA MIDI keyboard is needed to play the sounds you make. MPE keyboards such as the ROLI Seaboard and the Expressive E Osmose give each note its own pitch bend and pressure.
Stem modelSEPARATE uses a stem model of about 495 MB. You download it from this website and install it once from inside DreamCatch.

Getting it

One licence, three computers

One licence covers DreamCatch on up to three of your computers. The trial is the complete plugin for 14 days and it needs no payment card.

The manual is free to read before you buy and it describes every control in full.

Download the manual (PDF)

£59 including VAT
This is a one-off payment with no subscription, for DreamCatch on up to three computers.

The introductory price will rise on 1st February 2027 to £79 incl. VAT.

Start the 14-day trial

If you have a promotion code, you can enter it on the payment page.

Payment is handled securely by Stripe and buyers outside the UK see the price in their own currency. Your licence key appears as soon as payment completes and it is also emailed to the address you pay with.

Free 14-day trial

Download and install DreamCatch and open it on an instrument track in your DAW. In the licence panel choose Try it free for 14 days, type your email address and press CONTINUE. We email you a 6-digit code. Type it in and your trial starts. Starting the trial and activating a licence are the only two moments DreamCatch ever needs the internet. When you buy, choose I have a licence in the same panel and enter your licence key.

Download for macOS Download for Windows Download the stem model

The stem model comes as a zip file of about 495 MB. Unzip it, then install it once from inside DreamCatch: click the cog at the top right of the window, then INSTALL MODEL. Choose the file that ends in .onnx.

If Windows shows ‘Windows protected your PC’, click More info, then Run anyway.